GAS Day & Night Dehumidifier Controller

GAS Day & Night Dehumidifier Controller – 2.5KW Capacity Hygrostat
This controller is the perfect solution to regulating day and night humidity levels in conjunction with a dehumidifier.
They have 2 control dials that allow you to set separate day/night humidity levels.
They can be used with dehumidifiers up to 2.5KW(2500W), are simple to operate and feature a humidity/light sensor with a 4 metre cable, this sensor can be replaced by the end user if necessary.

Use
Simply plug the dehumidifier into the controller, then plug the controller into the mains socket( make sure the socket is switched off).
Place the sensor into the desired location(make sure that this is not placed above any humidifiers that you may be using), the controller can now be switched on.
The green led will light up when the dehumidifier in operation.
Dehumidifiers can only reduce humidity, if you need to raise humidity you will require a humidifier.

Caution
The sensor is very sensitive so do not have it in a position too close to the dehumidifier,make sure that you have good airflow to avoid high or low humidity pockets of air.
Ensure that the unit or sensor do not come into connect with water or liquids.
Do not use on an extension lead.