Gavita Pro 315e SE
The Gavita Pro 315e SE is a compact fixture with a new type of reflector mounting system: Instead of a bracket which holds the reflector on both sides, the reflector is now clipped on the ballast housing itself. This reduces size and weight, enables easy replacement and provides optimal positioning and stability of the small reflector.
Gavita Pro 630e SE CMH
The Gavita Pro 630e SE CMH contains two 315W CMH lamps. We use an intelligent double ballast concept, enabling to switch off one lamp in the fixture. To make sure that both lamps have equal burning hours and to balance light on the crop, we alternate which lamp is switched off every time an autodim event occurs or when you dim down to a low level.
The fixture is equipped with the M 132 SE CMH630 reflector (medium, 132 degrees beam angle, for double CDM 315 fixtures). The medium reflector is designed for CMH only installations and will give you over 90% uniformity on your crop with an optimal horizontal penetration of the crop.
Available with 930 Agro or 942 lamp
We recommend the 4200° Kelvin CDM Daylight Elite 942 for supplemental light and vegetative cycles. The 3000°Kelvin CDM Elite Agro 930 Agro is most suitable for generative cycles and stand-alone use. The CDM Elite Agro has added red light in the spectrum for extra efficiency.
Complete fixture
The integration of ballast and reflector results in a compact fixture. No external lamp wires results in low EMI, which makes the fixture compliant to FCC regulations. All CMH fixtures are FCC tested and compliant.
Designed for Gavita Master Controllers
Our CMH ballasts ballasts can be remote controlled by our Gavita Master Controllers. CMH lamps can not be dimmed without deterioration of the light maintenance over time, and restart problems. However, the CMH fixtures are equipped with a Repeater Bus connection so they can be integrated in a HPS solution and use the Master controller timing control and safety features.
Repeater bus interface
Developed specifically for fixed installation with brackets on Unistrut (C profile) systems, the Repeater Bus cabling system allows you to daisy-chain the fixtures in your installation. A Repeater Bus interconnect cable is included with every fixture. You can connect 5 strings of 100 fixtures per Master controller port. This enables you to control up to 1000 fixtures on one EL2 controller.
- Controllable with Master Controllers
- Red or Blue Spectrum
- Single or double lamps
- Gavita quality and reliability
Reviews
There are no reviews yet.