X-Stream Heated Propagators
X-Stream Heated Propagators offer ultimate heat control for large scale propagation, the X-Stream Heated Propagator combines a heated base and the humidity retention of the X-Stream lid with an ultra accurate, thermostatically controlled(also available without thermostat) heated base. Enough room for up to 150 seedlings or cuttings in the Standard version or 450 in the Large version. Seeds or cuttings are placed on the heated base using any propagation medium.
Bottom heat applied to fresh cuttings not only increases the strike rate or success rate, but it also increases the speed at which the cuttings will root.
Bottom heat is especially needed in the colder months, this is often the difference between cuttings rooting quickly and in good health or the cutting struggling to root in bad health, for example yellowing, which will slow the plant down as it will need to recover and increase the vegetative time.
Desired temperature is set – to within 1°C – using the digital thermostat. Heat is dispersed evenly across the base, unlike most heated propagators there are no hot or cold spots; so no uneven growth. The Thermostat is fully adjustable from 5°C to 30°C, allowing growers to adjust the propagation environment to suit their specific grow area. X-Stream lid sits on top of the heated base and maintains the heat and humidity required for successful propagation.
Available in two sizes, with or without a Root !T Thermostat.
Dimensions
Standard
External – 615mm x 425mm x 290mm(height)
Internal – 508mm x 308 x 225mm
Power consumption – 37 watts
Large
External – 1115mm x 625mm x 290mm(height)
Internal – 1050mm x 530mm x 240mm
Power consumption – 100 watts
Use
Plug the heated propagator into the thermostat and set to the desired temperature. Then place the thermostatic probe inside propagator, normally inside an unused rockwool or jiffy pellet, this will give you an accurate reading of the root temperature.
Alternatively you can hang the probe to control the air temperature.
As plants develop, the vents in the lid are opened to reduce humidity and gradually harden the plants off, ready for transplanting.
- Professional standard propagators
- Large for up to 450 seedlings or cuttings
- Standard for up to 150 seedlings or cuttings
- Available with or without thermostat
Reviews
There are no reviews yet.